CT ECO Basic Data Guide

Subregional Drainage Basins

Example of Subregional Drainage Basins with Subrational Drainage Basin Direction arrows

Description

A standardized mapping of natural drainage basins in Connecticut was completed in 1981 by the Connecticut Department of Environmental Protection (DEP). This drainage basin system divided Connecticut into 8 major basins, 45 regional basins, 337 subregional basins, 2,898 local basins, and 7,067 small drainage basin areas. The statewide mapping of natural drainage basins established a hierarchical system of basins based on drainage area size with large major basins subdivided into regional basins, regional basins subdivided into subregional basins, subregional basins subdivided into local basins, and local basins subdivided into smaller and more numerous drainage basin areas. It includes watersheds for Connecticut rivers, streams, brooks, lakes, reservoirs and ponds included on 1:24,000-scale 7.5 minute topographic quadrangle maps published by the U.S. Geological Survey (USGS) between 1969 and 1984. These basin units include smaller watersheds that drain into many of the small streams and ponds in Connecticut. These basin areas are the building blocks for the larger local, subregional, regional and major drainage basins defined by DEP.

Connecticut Subregional Drainage Basins includes 337 drainage basin areas, the majority of which range from 5 to 70 square miles in size and make up, in order of increasing size the larger regional and major drainage basin areas. The subregional basin number (SBAS_NO) uniquely identifies individual subregional drainage basins and is 4 characters in length. There are 335 unique subregional basin numbers. Examples include 6000 for the Housatonic River Main Stem Subregional Basin, 4300 for the Farmington River Subregional Basin, and 6002 for the Schenob Brook Subregional Basin. The first digit (column 1) designates the major basin, the first two digits (columns 1-2) designate the regional basin, and the first 4 digits (columns 1-4) designate the subregional basin. Note, there are slightly more subregional basin areas delineated (374) than unique subregional basin numbers (335) primarily due to a few stream confluences that split the same local basin into two areas. Refer to the Connecticut Subregional Drainage Basin GIS metadata for more information about drainage basin numbers.

Included with the subregional drainage basin boundaries are Subregional Drainage Basins Direction arrows that depict the general direction of surface water flow towards indivicual subregional drainage basin outlets. Theses arrows are meant to indicate where one basin drains into another and are intended aid in visualizing the network of subregional drainage basins in Connecticut. They do not depict the exact location of basin outlets.

These basin boundaries are the digital equivalent of the major, regional and subregional drainage basin boundaries published on the 1:125,000-scale state map entitled Natural Drainage Basins in Connecticut, McElroy, 1981.

Purpose

A drainage basin is an area of land where water from rain or snow melt drains downhill into a body of water such as a river, lake, wetland or ocean. The drainage basin includes both the streams and rivers that convey the water as well as the land surface from which water drains into those channels. Used as the basis for DEP drainage basin mapping, a natural drainage basin is one in which the outlet point is a natural occurring feature. These outlet points occur at stream confluences, stream outfalls into waterbodies, and impoundments.

The hierarchical system of drainage basin delineation and numbering, as implemented by DEP, allow for the association of the physical resources to the naturally occuring drainage system that covers Connecticut. This information can be used to determine where rainfall naturally flows over the land and downstream to a particular watercourse. It can be used to identify the upstream contributing watershed for a point along a river, stream, reservoir, lake, or pond. And for cataloging purposes, a drainage basin identifier can be associated with any location on land or water in Connecticut.

Use Limitations

Drainage basin boundaries were manually delineated by interpreting the 10 foot contour lines and hydrography features shown on USGS 1:24,000-scale topographic quadrangle maps. The horizontal positional accuracy of this information is consistent with other 1:24,000-scale hydrography related data such as Connecticut Hydrography, Connecticut Waterbody, Connecticut Named Waterbody and Connecticut Surface Water Quality Classification. Only limited field checking was conducted to verify the location of these basin boundaries. Basin boundaries may not be accurate in areas that have been diked for flood control, upland wetland and reservoirs having outlets into two basins, and areas where topographic mapping is not up to date, is inaccurate, or is not detailed enough to adequately define local drainage. Residential and commercial development, highway construction, and other changes to the landscape may have resulted in local modifications to the natural drainage pattern since the time these basin boundaries were delineated.

Related Information

Dataset Information

  • Status - Complete. Drainage basins were delineated for all of Connecticut. This information is not updated.
  • Date of Data - Basin delineation and mapping completed in 1988
  • Map Scale and Accuracy - The information meets horizontal National Map Accuracy Standards for 1:24,000-scale mapping (1 inch = 2,000 feet).

Additional Documentation

  • Subregional Drainage Basin Direction feature GIS Metadata – Contains technical documentation describing the Subregional Drainage Basin Direction (arrow) feature data and the data sources, process steps, and standards used to collect, digitize, and store this information in a geographic information system (GIS).
  • Subregional Drainage Basin Line feature GIS Metadata – Contains technical documentation describing the Subregional Drainge Basin (boundary) Line feature data and the data sources, process steps, and standards used to collect, digitize, and store this information in a geographic information system (GIS).
  • Subregional Drainage Basin Polygon feature GIS Metadata – Contains technical documentation describing the Subregional Drainge Basin (area) Polygon feature data and the data sources, process steps, and standards used to collect, digitize, and store this information in a geographic information system (GIS).
  • For a description of the system of drainage basin numbers and to identify either all upstream basins draining to a particular location or all downstream basins flowing from a particular location, refer to the Gazetteer of Drainage Areas of Connecticut
  • , Nosal, 1977, CT DEP Water Resources Bulletin 15, for the hydrologic sequence, headwater to outfall, of drainage basins.

Originators

GIS Data Download

  • Connecticut Drainage Basin data is downloadable from DEEP GIS Data.
  • Connect GIS and AutoCAD software to this information online using the Watershed CT ECO Map Service.